Flexmar Installation Example

3 1/2 Hours*

From First Coat of Flexmar NextGen to Walk-on Return to Service

Flexmar Polyaspartic flooring is easy to install.  But that's not the most important feature.  The key is the time it doesn't take for installation.  This time lapse illustration shows just how quickly your facility will be back in service:  3 1/2 hours.  

For more information visit our Flexmar Installation Facts.

*2-coat system/500 sq ft. installation

From First Coat of Flexmar NextGen to Walk-on Return to Service*

2-Coat Installation

3 1/2 Hours Return to Service

3-Coat Installation

5 Hours Return to Service

4-Coat Installation

6 1/2 Hours Return to Service

*2-coat system/500 sq ft. installation

 

3 1/2 Hours Return to Service After First Coat of Flexmar NextGen

There is no fine print. Here are the numbers.

Preparation Time

Is not included in the example.  Prep time varies by the job and would be similar no matter the resinous coating solution.  

2 Car Garage

An average 2 car garage at approximately 500 sqft.

Install Team

3-person team for installation.

Application: 2 coat

The example application is based on a 2-coat application. 

Odor/VOC's

There is virtually no odor to achieve this install time and 0-VOC's.

Low Temperature Installation Time Adjustment

When substrate temperatures and or air temperatures at the time of application are near or below freezing an additional 1 hour will be needed

From First coat of Flexmar NextGen to Return to Service

Based on a 500 sqft.Installation

2-Coat Application

For a 2 coat system.

3 1/2 Hours Return to Service

3-Coat Application

For a 3-coat application add 30 minutes for additional coat application and 1 hour for the 3rd coat to cure.

5 hoursReturn to Service

4-Coat Highbuild

For a 4-coat highbuild application, add an additional 30 minutes for application and and additional hour for the 4rth coat to cure.

6 1/2 Hours Return to Service

4X More Durable Than Epoxies

chemical-resistant-flexmar

Impervious to Chemicals

scratch-resistant-flexmar

Scratch Resistant

chip-resistant-flexmar

Chip Resistant

fade-resistant-flexmar

Color Won't Fade or Yellow

545243_222116677950496_1008313070_n
10426210_405285996300229_2661885982811969685_n
25933_136887919806706_882718397_n
537145_136886989806799_1635131189_n

Commercial Photo Gallery

See our photo gallery for real-world installations of Flexmar Polyaspartic Resinous Floor Coatings.

Residential Photo Gallery

If you would like to see our residential projects in real world situations

75063_139390072889824_1556657675_n
Flexmar Solid Color Polyaspartic Coatings
148300_136887696473395_1245813198_n

Ready for a Flexmar Floor?

Contact us today for more information about Flexmar products, available installation services through our applicator network, or if you need help choosing the right system for your floor.