Automotive Facility Flooring
Keep your doors open...flooring in hours.
Don't lose the use of your facilities for weeks.
Learn more about a floor that is quick to return to service, inexpensive to maintain, and easy to clean.
Don't Lose money when your floor is installed...
Budget cuts, growing class sizes, and the increased demand for accountability is commonplace in today's education systems. Bottom line, you must do more with less.
Saving money is simple with Flexmar!
Our NextGen™ polyaspartic coatings, stains, and sealers can outlast competitive hard-surface flooring systems and reduce maintenance costs.
Durability and Longevity...
Floors protected with Flexmar NextGen polyaspartic coatings can withstand heavy foot traffic, cart traffic, food spills, and even damage from mild acids. And your Flexmar polyaspartic floor will keep its like-new look for years, without fading, yellowing, scratching, chipping, or bubbling!
Maintenance Cost Savings
Floors protected with Flexmar NextGen polyaspartic coatings can save thousands of dollars each and every year in reduced maintenance programs. There is absolutely no need to wax, buff, polish, or burnish the floor, and no grout to clean, repair, or replace. This means that your maintenance staff won't have to work nights, weekends, and summers just to keep your facilities' floors looking good . . . and your facilities will use less energy as a result. All that's required is a periodic dry sweep and wet mop as needed. That's it!
Don't Replace Your Floor-Protect It!
Does your vinyl tile flooring still look good? Ceramic tile or terrazzo still intact? Don't rip up your existing flooring . . . Flexmar NextGen polyaspartics can be direct-applied to the floor to reduce application time and costs and to maximize your floor's lifespan. Either apply a clear sealer as a permanent finish, or coat the floor with a color flake, reverse flake, or Variegate® system for a new look. It's that simple!
3 1/2 Hours*
From First Coat of Flexmar NextGen to Walk-on Return to Service
Flexmar Polyaspartic flooring is easy to install. But that's not the most important feature. The key is the time it doesn't take for installation. This time-lapse illustration shows just how quickly your facility will be back in service: 3 1/2 hours.
For more information visit our Flexmar Installation Facts.
*2-coat system/500-1,500 sq ft. installation
From First Coat of Flexmar NextGen to Walk-on Return to Service*
3 1/2 Hours Return to Service
5 Hours Return to Service
6 1/2 Hours Return to Service
*2-coat system 500-1,500 sq ft. installation
FLEXMAR® NextGen™ Polyaspartic Coatings Provide Superior Durability, Cleanability for Auto Body Center Floor
Collision Care Auto Body get's an improved floor.
Learn more about Flexmar Polyaspartic floor coatings with these product animations
Eliminate Maintenance Costs with Flexmar
Flexmar Coatings is a member of the U.S. Green Building Council, and our coatings and sealers can contribute toward satisfying credits in the Indoor Environmental Quality and Materials and Resources categories under the LEED program.
Commercial Photo Gallery
See our photo gallery for real-world installations of Flexmar Polyaspartic Resinous Floor Coatings.
Ready for a Flexmar Floor?
Contact us today for more information about Flexmar products, available installation services through our applicator network, or if you need help choosing the right system for your floor.